B-5
DNW-A75/A75P
Setup Menu Settings in 525/60 System
n
When Bank 1 to 4 menu is recalled, the current menu will be overwritten.
Be sure to check the current menu first, before recall Bank 1 to 4.
Main Menu
ITEM-000 series: Operational parameter
ITEM Factory setting Current Bank 1 Bank 2 Bank 3 Bank 4
001: PREROLL TIME 5S
002: CHARACTER H-POSITION 1C
003: CHARACTER V-POSITION 57
004: SYNCHRONIZE ON
005: DISPLAY INFORMATION SELECT T&STA
006: LOCAL FUNCTION ENABLE ST&EJ
007: TAPE TIMER DISPLAY +_12H
008: MONITORING SELECTION MANU
FOR VTR-TO-VTR EDIT
009: CHARACTER TYPE WHITE
011: CHARACTER V-SIZE x1
013
*
: 525/625 SYSTEM SELECT OFF _____
*: ITEM-013 is no relation with Bank.
ITEM-B00 series: Menu bank parameter
This series is not necessary to write down the setting.
All settings of B00 series are OFF on the normal state. Set to ON only when ITEM is carried out.
After finishing, all settings of B00 series return to OFF automatically.
ITEM Factory setting
B01: RECALL BANK 1 OFF
B02: RECALL BANK 2 OFF
B03: RECALL BANK 3 OFF
B04: RECALL BANK 4 OFF
B11: SAVE BANK 1 OFF
B12: SAVE BANK 2 OFF
B13: SAVE BANK 3 OFF
B14: SAVE BANK 4 OFF
B20: RESET SETUP OFF
525/60
To Next Page
Loading...
