16.3 16.3: MENU > GPIO
16.3: MENU > GPIO
Stagebox GPIO
Select
Selects the GPIO in the
Stage Box (8 GPIO).
GPIO Up / Down
List
Scroll though the GPI
and GPO lists
The currently-selected input and output channels are
outlined in yellow.
GPI On / off
Enable and disable GPI
functionality
Function Select
Select the function to be
assigned to the GPI pin.
Depending on the function selection, the {Parameter}
eld may or may not be available. For example, the
Channel Mute (CH MUTE) function requires a channel
assignment - set using the {parameter} eld; the NEXT
CUE function does not require any additional parameter
Available functions: Channel Mute (CH MUTE); (F KEY
LED); Talkback Input (TB INPUT); Dim Monitors (DIM
MON); VIRTUAL GPI; LAST CUE; NEXT CUE; CUE UP;
CUE DOWN; RECALL CUE; Undo Snapshot (UNDO
SNAP).
Parameter Set
Used to assign addition-
al values to functions
Certain GPIO functions require and additional parameter.
Examples are channel number, virtual GPIO pin number,
and so on.
Trigger Edge
Select
Choose the triggered
edge for this GPI pin.
Choose either Rising, Falling, or Both. If you choose
'Both' the {Polarity} eld will become available.
To Next Page
Loading...
Need help?
General