Speco N8NXP - Default; Import;Export; Maintenance

136
5.7.5.4 Default
The factory default setup interface is shown in Figure 5-57.
Individual items can be selected - Network/Event/Storage/System Config/Camera.
Figure 5-57
5.7.5.5 Import/Export
The interface is shown in Figure 5-58. Export or import the system configuration files.
Figure 5-58
5.7.5.6 Maintenance
The maintenance interface is shown in Figure 5-59.
The device can be set to reboot automatically on a schedule.
Figure 5-59