Speco N8NXP - Camera Management (Local); Camera Setup and Connectivity

26
4.4.4 Color
Click to enable the color interface.
Please make sure the system is in 1x1 channel mode.
4.4.5 Search
Click to enable the search interface. Refer to section 4.7.2
4.4.6 Alarm Status
Click to enable the alarm status interface. This is for viewing device status and channel status.
4.4.7 Channel Info
Click to enable the channel information interface. This is for viewing information of the corresponding
channel.
4.4.8 Registration
Click to enable the EZ Camera interface.
4.4.9 Network
Click to enable the network setup interface. Please refer to section 4.10.
4.4.10 HDD Manager
Click to enable the HDD manager interface. Please refer to section 4.11.1.
4.4.11 USB Manager
Click to enable the USB Manager interface. It is to view USB information, backup and update.