35
In Figure 4-19, click to open the menu, you can set preset, tour, pattern, scan, etc. See Figure
4-21.
Figure 4-21
Please refer to the following table for detailed information.
Please note the above interface may vary due to different protocols. The button is grey and can not be
selected once the current function is null.
Right click mouse or click the ESC button at the front panel to go back to the Figure 4-19.
4.5.8.1 PTZ Function Setup
Click to go to the following interface to set preset, tour, pattern, and scan. See Figure 4-22.
Figure 4-22
To Next Page
Loading...
