85
Figure 4-81
4.11.4 HDD Detect
The unit can scan the status of each hard drive for any errors.
There are two types:
Quick detect is for detecting via the universal system files. The system can quickly complete the
HDD scan. If you want to use this function, please make sure the HDD is in use. If the HDD has
been removed from another device, please make sure the write-data is full after it installs on the
current device.
Global detect adopts the Windows mode to scan HDD’s. It may take a long time and may affect the
recording.
4.11.4.1 Manual Detect
See Figure 4-82.
Please select detect type and the HDD. Click Start Detect to begin.
To Next Page
Loading...
