Speco N8NXP - Connection

70
Figure 4-63
4.10.1.2 Connection
The connection setup interface is shown in Figure 4-64.
 Max connection: system supports a maximum of 128 users. Performance varies depending on the
network bandwidth.
 TCP port: Default value is 37777.
 UDP port: Default value is 37778.
 HTTP port: Default value is 80.
 HTTPS port: Default value is 443.
 RTSP port: Default value is 554.
Important: System will reboot after any of the above ports are changed. Please make sure the port
values do not conflict.