Analog-to-digital converters (ADC) RM0440
668/2126 RM0440 Rev 4
In regular simultaneous or interleaved modes: once the user sets bit ADSTART or bit
ADSTP of the master ADC, the corresponding bit of the slave ADC is also automatically
set. However, bit ADSTART or bit ADSTP of the slave ADC is not necessary cleared at the
same time as the master ADC bit.
In injected simultaneous or alternate trigger modes: once the user sets bit JADSTART or bit
JADSTP of the master ADC, the corresponding bit of the slave ADC is also automatically
set. However, bit JADSTART or bit JADSTP of the slave ADC is not necessary cleared at
the same time as the master ADC bit.
In dual ADC mode, the converted data of the master and slave ADC can be read in parallel,
by reading the ADC common data register (ADCx_CDR). The status bits can be also read in
parallel by reading the dual-mode status register (ADCx_CSR).
To Next Page
Loading...
Need help?
General
