STEP AS380 Series User Manual

Instruction Manual for AS380 Series Elevator Integrated Drive Controller
V
4.1.1 For typical terminal wiring diagram of elevator integrated drive controller. ____________ 26
4.2 Notice items for peripheral equipments connection ................................................. 27
4.2.1 Power supply ____________________________________________________________ 27
4.2.2 Breaker _________________________________________________________________ 27
4.2.3 AC reactor at the input side _________________________________________________ 27
4.2.4 Interference filter at the input side ____________________________________________ 27
4.2.5 Main circuit output contactor ________________________________________________ 27
4.2.6 Interference filters at the output side. __________________________________________ 27
4.2.7 AC reactor at output side ___________________________________________________ 27
4.2.8 DC reactor ______________________________________________________________ 28
4.3 The technical requirements for wire arrangement of peripheral equipments of the
elevator integrated drive controller. ................................................................................. 28
4.3.1 The cable requirement of hoist way and accompanying cable arrangement ____________ 28
4.3.2 Method of Wiring Between Call board and TXV+、TXV-、TXA+、TXA- ___________ 29
4.3.3 Hoist way switch position __________________________________________________ 30
4.3.4 Upper and Lower Leveling Inductor __________________________________________ 31
4.4 main circuit terminal wiring ....................................................................................... 33
4.4.1 The arrangement of main circuit terminal ______________________________________ 33
4.4.2 The main circuit terminal labeling and function description ________________________ 33
4.4.3 Main circuit wire specification _______________________________________________ 33
4.4.4 The main circuit composition ________________________________________________ 36
4.4.5 The detailed description of main circuit terminal wiring ___________________________ 36
4.5 anti-interference measures. ......................................................................................... 40
4.5.1 The specialized noise filter connected at the output side.___________________________ 40
4.5.2 Main circuit wiring arrangement _____________________________________________ 40
4.5.3 the better anti-interference measure ___________________________________________ 41
4.5.4 Relation between wiring length and carrier frequency. ____________________________ 41
4.6 Wiring of Control Circuit Terminals ......................................................................... 42
4.6.1 Layout of Control Circuit Terminals __________________________________________ 42
4.6.2 Functional Description of Control Circuit Terminals ______________________________ 42
4.6.3 Dip switch setting method __________________________________________________ 45
4.6.4 Wire specification of control circuit ___________________________________________ 45
4.6.3 main extension board SM.09I0/C introduction __________________________________ 46
4.6.5 Notice items for control circuit terminal wiring __________________________________ 48
4.7 The wiring of PG card terminals ................................................................................ 48
4.7.1 PG card – Incremental ABZ 12V _____________________________________________ 48
4.7.2 PG card – SIN/COS _______________________________________________________ 51
4.7.3 PG card – Incremental ABZ 5V ______________________________________________ 54
4.7.4 PG card – Endat with absolute value __________________________________________ 56
4.7.5 Precaution for PG card terminal wiring ________________________________________ 58
Chapter 5 Operator ..................................................................................................... 59

STEP AS380 Series Specifications

General

Brand	STEP
Model	AS380 Series
Category	Controller
Language	English