Shanghai STEP Electric Corporation
Chapter 3 Product function
Activate the door nudging function. If the elevator keep door opening and no door-closing signal
are sent due to light curtain or other reason, the elevator will be closed and acoustic warning will
alarmed.
53 base station doo-opening standby function
use parameter setting to choose the elevator door-opening and standby when it is in base station.
54 floor blocking within time slot fun
Conduct the specific blocking service to designated floor at specific time. The specific block
service means that user can choose to block outside call registration independently, blocking
instruction registration independently, blocking instruction and outside instruction registration.
Meanwhile, user can also choose not to block.
55 External board search function
Use operator to check whether the external board at each floor work properly or not.
56 evaluations on CAN communication interference
Use the operator to check the communication quality of CAN
57 Evaluation on encoder interference
Use operator to check the interference of encoder signal.
58 car adjustment
Revolutionary elevator adjustment method is provided. Working staffs can adjust the elevator
directly inside the car, monitor the elevator running condition so as to make the adjustment of
elevator leveling, comfort and other function more user-friendly.
59 intelligent adjustment
1）upload and download parameter quickly
2）increase fault operating instructions and fault refinement function
3）optimize leveling adjustment and leveling fin-tuning function
4）increase NC and NO self-study function
5）External board address intelligent self-study function
3.2.2 Optional function description
1. door pre-opening
The option enable leveling elevator to open door immediately upon arrival at the pre door-opening
zone. In this way the elevator operation is more efficient
2. door-opening and releveling
Due to the stretch of wire ropes in case of high-rise buildings, the parking car may move up and
down while passengers leave and board the car, which may lead to mal-levelling. Once this
situation is detected by the system, the control will make the car relevel at a slow speed with the
door open.
To Next Page
Loading...
Need help?
General
