Steris V-PRO maX 2 - Replacement Parts

8 — Routine Maintenance
89
10085896_H
V-PRO
®
maX 2
Operator Manual
• The control also informs the user that the pump oil and filters need changed and asks if the user wants to
continue anyhow as follows:
User must press Green Check (Yes) to initiate a cycle.
8.9 Replacement Parts
This section includes the following:
Introduction
Ordering Information
Recommended Spare Parts
Introduction
Use only STERIS-authorized parts on this equipment. Use of unauthorized parts voids the warranty.
Ordering Information
To order replacement parts and/or supply products, proceed as follows:
1. Include part number and description as listed in Supply Products and Recommended Spare Parts.
2. Include model and serial numbers of your equipment on your order.
3. Send your order directly to STERIS Sales and Service Center serving your area.
4. Contact STERIS if you need parts that are not listed in this manual.