Steris V-PRO maX 2 - Operator Maintenance Schedule; Cleaning the Sterilization System

8 — Routine Maintenance
80
Operator Manual
V-PRO
®
maX 2
10085896_H
NOTE: Never permit unqualified persons to service this Sterilization Unit.
8.3 Routine Operator Maintenance
This section includes the following:
Introduction
Daily
Weekly
Monthly
Introduction
Perform the following routine maintenance procedures as indicated in Daily, Weekly, and Monthly.
Daily
Check printer paper supply. Change printer paper roll per instructions listed in Change Printer Paper Roll.
Weekly
1. Complete instructions listed in Daily.
2. If dirty, clean Sterilization Unit chamber per instructions listed in Cleaning Chamber.
3. It is recommended to clean Touch Screen per instructions listed in Cleaning Touch Screen.
4. If Unit is equipped with Impact Printer, check quality of printout. If necessary, replace printer ink cartridge per
instructions listed in Replace Ribbon Cartridge.
Monthly
1. Complete instructions listed in Daily.
2. Complete instructions listed in Weekly.
3. Perform leak test on Sterilization Unit per instructions listed in Leak Test.
8.4 Cleaning Sterilization System
This section includes the following:
Cleaning Panels
Cleaning Chamber
Cleaning Touch Screen