Steris V-PRO maX 2 - Failure Reading PT2 - ALM; Failure Reading RTD1 - ALM; Failure Reading RTD2 - ALM; Failure Reading RTD3 - ALM

7 — Troubleshooting
61
10085896_H
V-PRO
®
maX 2
Operator Manual
7.27 Failure Reading PT2 — ALM
Condition
Occurs if PT2 is reading outside of normal range.
General Troubleshooting
Additional Information
Acknowledge alarm.
1. Load must be repackaged and reprocessed after
Abort Phase is completed. Call STERIS.
7.28 Failure Reading RTD1 — ALM
Condition
Occurs if RTD1 (Vaporizer) is reading outside of normal range.
General Troubleshooting Additional Information
Acknowledge alarm.
1. Load must be repackaged and reprocessed after
Abort Phase is completed. Contact STERIS.
7.29 Failure Reading RTD2 — ALM
Condition
Occurs if RTD2 (Redundant Vaporizer) is reading outside of normal range.
General Troubleshooting Additional Information
Acknowledge alarm.
1. Load must be repackaged and reprocessed after
Abort Phase is completed.
7.30 Failure Reading RTD3 — ALM
Condition
Occurs if RTD3 (Chamber) is reading outside of normal range.
General Troubleshooting Additional Information
Acknowledge alarm.
1. Load must be repackaged and reprocessed after
Abort Phase is completed.