Steris V-PRO maX 2 - Printouts; Power Up Printout; Service Mode Printout

9 — Printouts
91
10085896_H
V-PRO
®
maX 2
Operator Manual
Printouts
This section includes the following:
Power Up
Service Mode
Calibration
Cycle and Leak Test
Printer Self Test
Typical Alarm Printout
Power Up
On power up the following printout is generated that includes the software information and the serial number.
********* POWER UP *********
DATE: 08/02/21
TIME: 11:16:18A
STERILIZER NO:
MACHINE TYPE:
V-PRO MAX 2
SERIAL #
SOFTWARE
10288251 V 1.83.2 r1250
AUG10 2020 12:30:47
Firmware, IO Board #1
10079098v01.00.09
****************************
.
Service Mode
Upon successfully entering Service Mode, SERVICE Menu screen and the following typical printout occurs.