Steris V-PRO maX 2 - VHP Sterilization Cycle Operation

6 — Operation
37
10085896_H
V-PRO
®
maX 2
Operator Manual
Figure 6-2. Typical Chamber Shelf
6.6 VHP Sterilization Cycle Operation
This section includes the following topics:
Introduction
Control Options
Aborting Cycles
Pop-Up Screens
Unload Sterilization Unit
Introduction
DANGER
FIRE AND EXPLOSION HAZARD
● Verify all materials coming in contact with hydrogen peroxide are compatible with
oxidizers. Contact STERIS or the material manufacturer for information on material
compatibility.
● This Sterilization Unit is not designed to process flammable liquids. Do not process
liquids, linens, powders or any cellulose materials. Process only those materials
compatible with hydrogen peroxide.