10 — Appendix A
107
10085896_H
V-PRO
®
maX 2
Operator Manual
Table 10-2. Materials NOT Compatible With Sterilant (continued)
Materials NOT Compatible With Hydrogen Peroxide
Items with mated Nylon
® 1
surfaces
Single use items (manufacturer does not recommend re-sterilization)
Implants where manufacturer has not specifically recommended sterilization in this Low Temperature Sterilization
System
Instruments and devices that cannot withstand a vacuum and are labeled for gravity steam sterilization methods
only
Items whose design permits surfaces to collapse onto each other (unless some method is devised to keep the
surfaces separated)
Devices with internal parts (e.g., sealed bearings) that cannot be immersed may present difficulties in cleaning and
should not be processed in this Sterilization Unit
1 Nylon is a registered trademark of the DuPont Corporation.