Steris V-PRO maX 2 - Page 24

2 — Glossary and Symbols
13
10085896_H
V-PRO
®
maX 2
Operator Manual
Table 2-2. Definition of Symbols on Sterilization System (continued)
Symbol
Definition
1-4
129376-417 Operator Manual Listing of Safety Precautions
Symbol Definition
Protective Earth (Ground)
Electrostatic Sensitive Device
Electric Shock Hazard
Sterilization Unit Door Open
Sterilization Unit Door Closed
Locked Cycle or Setup Options
Unlocked Cycle or Setup Options
Attention, Consult Manual for Further Instructions
A Amperage Rating of the Unit
V Voltage Rating of the Unit
~ Alternating Current
Hz Frequency of the Unit
φφ
φφ
φ Phase of the Unit
SNSN
SNSN
SN Serial Number of the Unit
ON
OFF
Oxidizer
Corrosive
3~ Three Phase Alternating Current
Definition of
Symbols
The chart below contains symbols which may be on your Sterilization System:
Oxidizing Hazard
SN
Serial Number of Unit
V~
Voltage Rating of Unit, Alternating Current
A
Amperage Rating of Unit
Hz
Frequency Rating of Unit
ф
Phase of Unit
Table 2-3. Definition of Symbols on Control Screens
Symbol
Definition
Silence Alarm Touch Pad
Abort Touch Pad
STATUS Screen Touch Pad
Go to Previous Screen or Alarm Acknowledge Touch Pad
5-4
129385-215 Operator Manual Component Identification
Figure 5-3. Examples of Out-Of-Cycle Screens
Figure 5-4. Examples of In-Cycle Screens
IN STANDBY Screen Touch Pad
1. Reference Figure 4-3
2. Ref Figure 5-3 Status
3. Ref Figure 5-3 Cycle
Sterilant Cartridge (Cup) Empty Icon
1. Reference Figure 4-3
2. Ref Figure 5-3 Status
3. Ref Figure 5-3 Cycle
Sterilant Cartridge (Cup) Full Icon
Vacuum Pump and Filter Preventive Maintenance Required – Maintenance
Past Due (Red)