Engine Mechanical: 1D-53
Crankcase
• Clean the mating surfaces of the crankcases.
• Install the dowel pins in the upper crankcase.
• Apply a bond to the mating surface of the lower crankcase as follows.
: Sealant 99000–31140 (SUZUKI Bond 1207B or equivalent)
NOTE
• Make sure that the mating surfaces are free from moisture, oil, dust and other foreign materials.
• Apply a bond thinly and evenly and assemble the crankcases within a few minutes of application.
• Take extreme care not to apply any bond to the bearing surfaces.
I649G1140157-01
The line of BOND
I649G1140158-02
To Next Page
Loading...
