Suzuki AN650 2002 - Page 100

ENGINE 3-49
Conrod I.D.
Crank pin O.D.
[09900-20202: Micrometer (25 – 50 mm)
Bearing thickness

BEARING ASSEMBLY
• When fitting the bearing to the bearing cap and conrod, be
sure to fix the stopper part
A first, and press in the other end.
• Apply molybdenum oil solution to the crank pin and bearing
surface.
O MOLYBDNUM OIL SOLUTION
Code
A I.D. specification
1
48.000 – 48.008 mm
(1.8898
–
1.8901 in)
2
48.008 – 48.016 mm
(1.8901 – 1.8904 in)
Code
B O.D. specification
1
44.992 – 45.000 mm
(1.7713 – 1.7717 in)
2
44.984 – 44.992 mm
(1.7710 – 1.7713 in)
3
44.976 – 47.984 mm
(1.7707 – 1.7710 in)
Color Thickness
Green
1.480 – 1.484 mm
(0.0583 – 0.0584 in)
Black
1.484 – 1.488 mm
(0.0584 – 0.0586 in)
Brown
1.488 – 1.492 mm
(0.0586 – 0.0587 in)
Yellow
1.492 – 1.496 mm
(0.0587 – 0.0589 in)
Color code
The bearing must be replaced as a set.