CVT 5-7
• Remove the secondary pulley shaft nut by holding the shaft
with the special tools.
[ 09920-31020: Extension handle
09920-31030: CVT secondary pulley shaft holder
• Remove the secondary shaft adaptor with a bearing puller.
• Remove the primary pulley shaft bolt by holding the primary
pulley shaft with the special tools.
[ 09920-31010: CVT primary pulley shaft holder
09920-31020: Extension handle
• Screw in the special tool and remove the primary pulley shaft
adaptor.
[ 09920-31040: CVT primary pulley shaft adaptor
remover
To Next Page
Loading...
