5-14 CVT
CVT CASING/COVER INSPECTION
• Replace the oil seal
1 with a new one.
• Rotate the bearing by finger to inspect for abnormal play,
noise and smooth rotation.
• Replace the bearing if there is anything unusual.
• Replace the O-ring with a new one.
• Apply SUZUKI SUPER GREASE “A” to the new O-ring and
install it.
W 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Thoroughly clean the case free from dirt and sealant.
CVT CASING/COVER DISASSEMBLY
• Remove the bearing retainer
1.
Replace the oil seal every time the CVT assembly is
separated.
To Next Page
Loading...
