FI SYSTEM/ CVT SYSTEM 6-35
z
09900-25008: Multi circuit tester
u
Tester knob indication: Voltage (
-
)
3
Check the speed sensor output voltage.
Insert the copper wires to the lead wire caupler. (White –
Black/White)
Turn the ignition switch ON.
Check that the voltage varies when a screwdriver is
brought close to the pick-up face of the speed sensor.
V
OK
NG
Short circuit in the lead
wire.
Replace the speed sensor
with a new one.
Recheck ECM coupler for loose or
poor contacts.
Replace ECM with a new one and
inspect it again.
3
3
To Next Page
Loading...
