6-48 FI SYSTEM/ CVT SYSTEM
3
OK
NG
;
PPS resistance : (Lbl/Y or Bl – B)
Compressed : 1.9 – 2.3 kΩ
Extended : 0.2 – 1.0 kΩ
z
09900-25008: Multi circuit tester
t
Tester knob indication: Resistance (Ω)
Replace the PPS with a
new one.
Replace the ECM with a new one, and inspect it again.
Turn the ignition switch OFF.
Remove the PPS.
Measure the resistance each when the sensor is
compressed and extended to the maximum between
Lbl/Y or Bl wire and B wire terminals.
Check the PPS smooth movement.
8
,
D
or
J
wire open or shorted to ground, or poor
connection.
If wire and connection are OK, intermittent trouble or faulty
ECM.
Recheck each terminal and wire harness for open circuit and
poor connection.
CVT control unit coupler
Ω
Ω
3
3
To Next Page
Loading...
