EMISSION CONTROL INFORMATION 12-7
• Connect the 12 V battery to the PAIR control solenoid valve
terminals and check the air flow.
• If air does not flow out, the solenoid valve is in normal condi-
tion.
• Check the resistance between the terminals of the PAIR con-
trol solenoid valve.
Resistance: 20 – 24 Ω
ΩΩ
Ω (at 20 °C/68 °F)
[ 09900-25008: Multi circuit tester set
U Tester knob indication: Resistance (Ω
ΩΩ
Ω)
If the resistance is not within the standard range, replace the
PAIR control solenoid valve with a new one.
• Installation is in the reverse order of removal.
• Connect the PAIR control solenoid valve lead wire coupler
securely.
Battery
Ω
To Next Page
Loading...
