3-14 ENGINE
• Remove the cylinder head gasket
1, dowel pins
2 and cam
chain guide
3.
• Remove the cylinder
4.
• Remove the cylinder base gasket
5 and dowel pins
6.
PISTON
• Place a clean rag over the cylinder base so as not to drop the
piston pin circlip into the crankcase.
• Remove the piston pin circlip.
• Remove the piston by driving out the piston pin.
NOTE:
* Scribe the piston number on the head of the piston.
OIL HOSE
• Remove the oil hose
7 and oil return hose
8.
GENERATOR COVER
• Remove the generator cover
9.
To Next Page
Loading...
