Suzuki AN650 2002 - Page 67

3-16 ENGINE
CLUTCH
• Remove the clutch cover
1.
• Remove the clutch housing nut and washer.
• Remove the clutch assembly.
[ 09930-40113: Rotor holder
• Remove the clutch shaft
3.
• Remove the driveshaft oil seal retainer
4.
STARTER CLUTCH
• Remove the starter clutch cover
5.
• Remove the starter torque limiter shaft
6, starter torque lim-
iter
7 and washer.
• Remove the starter idle gear shaft
8 and starter idle gear 9.