84
14
. Apply molybdenum disulfide grease
to
the
camshaft bearing journals.
1
5.
Make sure the locating pin
(F
igur
e 56) is
in
place
in
the end of the camshaft.
16.
Pull up on
th
e camsha
ft
drive chain and
in
sert
the camshaft through the chain and
inlO
the cylin-
der
head (Figure 57).
17.
Rotate the camshaft so the lobes are facing
down.
18
. Install the camshaft sprocket (
Figure
58) and
drive chain (Figure 59),
CAUTION
Very expensive damage could result
from improper camshaft drive chain
to
ca
mshaft aligllmenl. Recheck your
work several times 10 be sure alignmem
is correct.
19.
Align
the
camshaft index marks (Figure
60
)
with the top surface
of
the cylinder head.
20.
Align the locating pin on the end of the
camshaft with the hole
in
the camshaft drive
sprocket and position the sprocket onto the
camshaft
(F
igure
61
).
21.
Position the lockwashcr so
it
covers the
locating pin on the camshaft (Fig
ure
62). This is
10
keep the pin from falling out should
it
work
loose.
CHAPTER FOUR
To Next Page
Loading...
