ENGINE 3-81
• Fit the gearshift forks No. 1
8, No. 2
9, and reverse gearshift
fork
0 into the gearshifting grooves.
NOTE:
Three kinds of gearshifting forks are used. They resemble each
other very closely in external appearance and configuration.
8: Gearshift fork No. 1
9: Gearshift fork No. 2
0: Reverse gearshift fork
• Install the reverse shift cam
A.
NOTE:
When installing the reverse shift cam, be sure to install the
washer
B and snap ring
C.
• Install the gearshift cam.
NOTE:
When installing the gearshift cam, let the pin
D face the hole
E
of the gearshifting fork shaft.
To Next Page
Loading...
