ENGINE 3-97
• Tighten the generator cover bolt.
• Install the seal washer to the bolt
A.
• Apply SUZUKI SUPER GREASE “A” to the gearshift cam
stopper.
• Install the gearshift cam stopper bolt
A.
• Tighten the bolt
A.
' 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
# Transfer shift cam stopper bolt:
23 N·m (2.3 kgf-m, 16.5 lb-ft)
STARTER CUP
• Apply SUZUKI SUPER GREASE “A” to the O-ring and lip of
the oil seal.
• Install the starter cup.
' 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
• Tighten the starter cup nut by using a suitable bar.
SPEEDOMETER GEARBOX
• Remove the speed sensor
1.