ENGINE 3-105
CAM CHAIN TENSION ADJUSTER
• Insert the
- screwdriver into the slotted end of the cam chain
tension adjuster, then turn it clockwise to lock the spring ten-
sion.
• Install the new gasket
1 and cam chain tension adjuster.
• Install the new gaskets
2 and tighten the bolts to the speci-
fied torque.
# Cam chain tension adjuster mounting bolt:
10 N·m (1.0 kgf-m, 7.0 lb-ft)
• After installing the cam chain tension adjuster, turn a
-
screwdriver counterclockwise.
NOTE:
As the slotted end turns, the tension rod is advanced under
spring force and pushes the cam chain tension adjuster against
the cam chain.
• Install the new gasket
3 and tighten the spring holder bolt to
the specified torque.
# Spring holder bolt: 8 N·m (0.8 kgf-m, 5.7 lb-ft)
• Adjust the valve clearance. (!2-5)
• Apply grease to the new O-rings and install the valve inspec-
tion caps.
' 99000-25030: SUZUKI SUPER GREASE “A” (USA)
99000-25010: SUZUKI SUPER GREASE “A” (Others)
To Next Page
Loading...
