4-6 DRIVE TRAIN
• Remove the snap ring.
• Remove the bearing with the special tool.
# 09913-50121: Oil seal remover
NOTE:
If there is no abnormal condition, the bearing removal is not nec-
essary.
"
• Remove the shifting sleeve.
BEVEL PINION GEAR
• Remove the snap ring.
• Remove the pinion gear together with the bearing.
BEVEL PINION GEAR BEARING
• Remove the bearing from the pinion gear with the special tool.
# 09913-70210: Bearing installer set
NOTE:
If there is no abnormal condition, the bearing removal is not nec-
essary.
"
The removed bearing must be replaced with a new
one.
The removed bearing must be replaced with a new
one.
To Next Page
Loading...
