DRIVE TRAIN 4-5
• Remove the oil seals out of the gear case and its cover with
the special tool.
# 09913-50121: Oil seal remover
NOTE:
If there is no abnormal condition, the oil seal removal is not nec-
essary.
"
SHIFTING SLEEVE/UNIVERSAL JOINT YOKE
• Remove the snap ring out of its groove and slide it towards
the shifting sleeve.
• Remove the universal joint yoke assembly with the special
tool.
# 09930-30190: Rotor remover attachment
09930-30104: Sliding shaft
• Remove the oil seal out of the gear case with the special tool.
# 09913-50121: Oil seal remover
NOTE:
If there is no abnormal condition, the oil seal removal is not nec-
essary.
"
The removed oil seal must be replaced with a new one.
The removed oil seal must be replaced with a new one.
To Next Page
Loading...
