Suzuki LT-F500F 2002 - Page 163

4-14 DRIVE TRAIN
FRONT DRIVE (DIFFERENTIAL) GEAR CASE [FINAL
ASSEMBLY]
• Install the removed shims to the gear case and its cover.
• Install the differential assembly to the gear case.
• Install the dowel pin and apply a sealant to the mating surface
of the case.
& 99104-31140: SUZUKI BOND “1207B” (USA)
' 99000-31110: SUZUKI BOND “1215” (Others)
NOTE:
After the backlash and tooth contact have been checked or
adjusted, apply a sealant to the mating surface of the case.
• When installing the gear case cover, align the shifting fork
with its groove.
• Apply THREAD LOCK SUPER “1303” to the case cover bolts
and tighten them to the specified torque in a crisscross pat-
tern.
) 99000-32030: THREAD LOCK SUPER “1303”
( Gear case cover bolt: 23 N·m (2.3 kgf-m, 16.5 lb-ft)
NOTE:
After the backlash and tooth contact have been checked or
adjusted, apply THREAD LOCK SUPER “1303” to the case
cover bolts.