CHASSIS 7-81
• Remove the clip.
NOTE:
Flatten the locked parts
A with a long nose pliers.
• Remove the clip.
• Remove the parking cable
1 with the parking cam arm.
• Release the cable adjuster lock. (!7-83)
• Connect the parking cam arm
3 to the parking cable
4.
• Align the punched mark
A on the parking cam arm
3 with the
punched mark
B on the parking cam shaft.
• Install the parking cable
4 and clip
5 to the stopper
6 on the
swingarm.
• Make sure that the parking cam arm is in “P” position.
$
Make sure that the installation angle of the parking
lever is accurate.
P
To Next Page
Loading...
