3-4 ENGINE
• Remove the engine under cover
1.
• Remove the carburetor. (!5-8)
• Disconnect the breather hose
2 that connects the oil retun
tank and the engine.
• Disconnect the engine ground lead wire
3 and starter motor
lead wire
4.
• Remove the starter motor
5.
• Disconnect the speed sensor lead wire coupler
6.
• Disconnect the gearshift lever lead wire coupler
7.
• Disconnect the generator lead wire coupler
8 and signal gen-
erator lead wire coupler
9.
• Disconnect the neutral switch lead wire couplers
0.
To Next Page
Loading...
