Tadano GR-700N - Check after Replacing Brake Hose; Accelerator Adjustment; Accelerator Pedal

59
WY05-3920E
Y-7
Y-7
Assembly Adjustment (Traveling Device)
1.3 Check after replacing brake hose
After you replace the brake hoses and so on,
make sure that any contact does not occur
between the hoses and the structures in any
situation. Check it with moving suspension (up
and down) and steering (right and left.)
In addition, make sure that any hose is not
twisted forcibly.
2. Accelerator adjustment
2.1 Accelerator pedal
Switch
(Idle volume)
Idling
Accelerator sensor
View A