Tascam 2400 - Using Automatic Punching in and out

6 - Recorder functions
Using automatic punching in and out
Follow these procedures to punch in and out automatically and
record.
1. Conrm that the icon appears on the Home Screen.
2. Press the REC buttons for the tracks you want to record
using automatic punch in/out.
NOTE
Punching in can be used simultaneously with a maximum
of 8 tracks. Press REC buttons to reduce the number of
recording tracks to 8 or less.
3. Press the 0 button.
i The transport starts playback from the pre-roll point.
Both track playback and input source signals can be
monitored. (see "Setting a pre roll point" on page
35.)
i When the punch in point is reached, only the input
source signal will be monitored. The 0 button will
light.
i When the punch out point is reached, both track
playback and input source signals will be monitored.
The 0 button will become unlit.
i Playback will automatically stop two seconds after the
punch out point. The 7/9 button will blink.
36 TASCAM Model 2400