Tascam 2400 - Audio Performance; Recording Times; Bluetooth; Other

17 - Specications
Audio performance
Noise
Residual output noise (22kHz, A-weighted)
−100 dBu (MAIN MIX OUT: ALL FADER MIN, MAIN MIX OFF)
Equivalent input noise (EIN)
−128 dBu ( Rs = 150 Ω, MIC IN w INSERT SEND, gain knob
at MAX, A-weighted)
Total harmonic distortion ratio (THD+N)
(Gain knob at MIN, 1 kHz)
MIC IN w MAIN OUT: 0.01% or less
MIC IN w MAIN OUT: 0.004% @
(+2 dBu, BYPASS switches on)
Frequency response
(All GAIN knobs minimized, 1 kHz)
20 Hz to 30 kHz (+0.5/−1.0 dB: Analog)
20 Hz to 20 kHz (+0.5/−1.0 dB: Digital)
Crosstalk
(1 kHz, BPF)
Between channels: −80 dB
Maximum gain
(All GAIN knobs maximized, PAN knobs turned completely
left or right, BYPASS switches on, MASTER BUS IN switch o)
MIC w MAIN OUT: 74 dB
MIC w INSERT OUT: 54 dB
MIC w SUB OUT: 74 dB
MIC w AUX OUT: 75 dB
USB/SD w MAIN OUT: 24 dB
Recording times
Recording format
Recording time (hours:
minutes) for 32GB card
16-bit/44.1 kHz WAV, 24 tracks 4:10
16-bit/48 kHz WAV, 24 tracks 3:50
24-bit/44.1 kHz WAV, 24 tracks 2:47
24-bit/48 kHz WAV, 24 tracks 2:33
o The recording times shown above are estimates. They might
dier depending on the SD card in use.
Bluetooth
Bluetooth version: 5.1
Output class: 2 (about 10m* unobstructed transmission
distance)
Supported prole: A2DP
Supported A2DP codecs: SBC, AAC
Supported A2DP content protection: SCMS-T
* The transmission distance is only an estimate and might vary
depending on the surrounding environment and radio wave
conditions.
Other
Power
AC 100-240V, 50/60Hz
Power consumption
65W
Dimensions
With side panels
680.5 × 132.5 × 568.0mm (W x H x D, including
protrusions)
Without side panels
638.5 × 132.5 × 568.0mm (W x H x D, including
protrusions)
Weight
14 kg
Guaranteed operating temperature range
0 – 40°C (32 – 104°F)
Guaranteed operating humidity range
5 – 85% (without condensation)
72 TASCAM Model 2400