Tascam 2400 - Loading WAV Files from a Computer

11 - Using a computer to transfer data
Loading WAV les from a computer
1. Use a USB cable to connect USB ports on the computer and
this unit. (see "Connecting with a Computer" on page 54.)
2. Click the “Model 2400” drive on the computer to show the
“MTR”, “MUSIC” and “UTILITY” folders.
3. Drag and drop les on the computer that you want to
transfer to the unit to the “MUSIC” folder.
ATTENTION
i The “UTILITY” folder is used when updating the unit
system, forexample.
i Do not change names, delete or otherwise alter individual
les inside the “MTR” folder. Doing so could prevent
loading data as a song and make proper recording and
playback operations impossible.
TIP
i You can manage the content of “MTR” or “MUSIC” folders
from the computer.
i You can create subfolders in the “MUSIC” folder up to the
second level for use with this unit. The Mlode 2400 cannot
recognize sub-folders and les located at the third layer
level or below.
TASCAM Model 2400 55