Technicolor TG582n Cli Reference Guide

DHCP COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
123
dhcp client ifconfig
Configure a DHCP client.
SYNTAX:
dhcp client ifconfig intf = <>
[label = <{None|DSCP|Interactive|Management|
Video|VoIP-RTP|VoIP-Signal|default}>]
[metric = <number{0-255}>]
[dnsmetric = <number{0-100}>]
[broadcast = <{disabled|enabled}>]
[serverroute = <{disabled|enabled}>]
[followlabel = <{disabled|enabled}>]
where:
intf The name of the dynamic interface to be configured. REQUIRED
label Label for default gateway and static routes. OPTIONAL
metric Route metric for default gateway and static routes. OPTIONAL
dnsmetric DNS route metric. OPTIONAL
broadcast Operate client in unicast/broadcast mode. OPTIONAL
serverroute Insert a route for the DHCP server IP OPTIONAL
followlabel If enabled the DHCP client's unicast traffic will follow the
route label specified. If disabled DHCP unicast traffic will
follow standard routes
OPTIONAL

Technicolor TG582n Specifications

General

Type	ADSL Modem Router
Wi-Fi Standards	802.11b/g/n
Antenna	Internal
Security	WEP, WPA, WPA2
VoIP	No
Ethernet Ports	4
USB Ports	1 USB 2.0 port
ADSL Standards	ADSL2, ADSL2+