TLS COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
791
tls self cert list
List certificates
SYNTAX:
tls self cert list [index = <number>]
[expand = <{disabled|enabled}>]
Display/modify upgrade settings = <{disabled|
enabled}>
where:
index Certificate index OPTIONAL
expand Display more informationCommand: upgrade config OPTIONAL
Display/modify upgrade settings Syntax : config [enable = <{no|yes}>] [attempt = <|yes}>] >]
[trace_level = <] >] >] [acsContactTimeout = <>]
REQUIRED
SYNTAX:
tls self cert list [enable = <{no|yes}>]
[attempt = <|yes}>]
[trace_level = <] >]
[acsContactTimeout = <>]
where:
enable Enable firmware upgrade OPTIONAL
attempt Track the number of upgrade attempts OPTIONAL
trace_level Set the trace level OPTIONAL
acsContactTimeout Set acsContactTimeout (minutes) OPTIONAL