Technicolor TG582n - Syslog Msgbuf Send

SYSLOG COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
759
syslog msgbuf send
Send messages to remote syslog server.
SYNTAX:
syslog msgbuf send [fac = <{kern|user|mail|daemon|auth|syslog|
lpr|news|uucp|cron|security|ftp|local6|
local7}>]
[sev = <{emerg|alert|crit|err|warning|notice|
info|debug}>]
[hist = <{disabled|enabled}>]
dest = <ip-address>
where:
fac Syslog facility level. OPTIONAL
sev Syslog severity level. OPTIONAL
hist Syslog display message history (over several bootups) OPTIONAL
dest Remote syslog server destination: an ip-address. REQUIRED