SERVICE COMMANDS
734
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
service system mapadd
Add a port map for a service.
SYNTAX:
service system mapadd name = <{PPTP|HTTP|HTTPs|webservice|HTTPI|FTP|
TELNET|DNS-S|MDAP|SSDP}>
intf = <{loop|Internet|LocalNetwork}>
port = <{undefined|at-echo|at-nbp|at-rtmp|at-
zis|auth|bgp|biff|bootpc|finger|ftp|ftp-data|
gopher|h323|httpproxy|ike|ils|imap2|imap3|
ingres-net|ipcserver|ipx|irc-o|irc-u|kerberos|
ldap|login|netbios-dgm|netbios-ns|netbios-
ssn|netwall|netware-ip|new-rwho|nfds|nicname|
nntp|ntalk|ntp|pcmail-srv|pop2|pop3|printer|
qotd|realaudio|rip|rtelnet|rtsp|sip|smtp|snmp|
snmptrap|snpp|sntp|sql*net|sql-net|sqlserv|
sunrpc|syslog|systat|talk|telnet|time|timed|
tftp|ulistserv|utime|uucp|uucp-rlogin|who|www-
http|whoami|xwindows} or number>
where:
name The name of the service for this map. REQUIRED
intf The interface for this map. REQUIRED
port The port for this map. REQUIRED
To Next Page
Loading...
