SYSLOG COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
761
syslog ruleadd
Add a new rule to the syslog configuration.
SYNTAX:
syslog ruleadd fac = <{kern|user|mail|daemon|auth|syslog|lpr|
news|uucp|cron|security|ftp|local6|local7|all
or comma-seperated }>
sev = <{emerg|alert|crit|err|warning|notice|
info|debug}>
dest = <ip-address>
where:
fac Syslog rule facility. REQUIRED
sev Syslog rule severity. REQUIRED
dest Syslog rule destination: an ip-address. REQUIRED