Technicolor TG582n - Eth Switch Qos Ifconfig

ETH COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
405
eth switch qos ifconfig
Configure per port qos parameters.
SYNTAX:
eth switch qos ifconfig port = <number{1-4}>
mode = <[+/-]flag[+/-flag...]{802.1p high
diffserv tos}>
[flowcontrol = <{disabled|enabled}>]
where:
port The port. REQUIRED
mode Classifier. REQUIRED
flowcontrol Enable/disable flow-control. OPTIONAL