Technicolor TG582n Cli Reference Guide

ATM COMMANDS
38
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
atm oam cc send
Send CC activate/deactivate to connection.
SYNTAX:
atm oam cc send port = <{dsl0|dsl1|atm2|atm3|aal5|atm5} or
number>
vpi = <number{0-31}>
[vci = <number{0-511}>]
[span = <{segment|end2end}>]
[action = <{activate|deactivate}>]
[direction = <{source|sink|both}>]
where:
port The ATM port number. REQUIRED
vpi The Virtual Path Identifier. REQUIRED
vci The Virtual Channel Identifier. OPTIONAL
span Send CC action end2end or segment. OPTIONAL
action The CC action. OPTIONAL
direction Source, sink or both (default: both). OPTIONAL

Technicolor TG582n Specifications

General

Type	ADSL Modem Router
Wi-Fi Standards	802.11b/g/n
Antenna	Internal
Security	WEP, WPA, WPA2
VoIP	No
Ethernet Ports	4
USB Ports	1 USB 2.0 port
ADSL Standards	ADSL2, ADSL2+