CONFIG COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
63
config dump
Show the saved configuration file
SYNTAX:
config dump [configchangemode = <{immediate|delayed}>]
[probes = <{disabled|enabled}>]
[udptrackmode = <{strict|loose}>]
[safepredicts = <{disabled|enabled}>]
where:
configchangemode Select how config changes are handled. OPTIONAL
probes Enable/disable alive probes on idle connections. OPTIONAL
udptrackmode UDP connection tracking mode. OPTIONAL
safepredicts Enable/disable safe CONN/NAT application helper
predictions (predicted connection must have same IP
addresses as its parent).
OPTIONAL
To Next Page
Loading...
