Technicolor TG582n Cli Reference Guide

SERVICE COMMANDS
732
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
service system ipdelete
Delete an IP address (range) from the access list.
SYNTAX:
service system ipdelete name = <{PPTP|HTTP|HTTPs|webservice|
FTP|TELNET|RIP-Query|DNS-S|MDAP|SSDP|
PING_RESPONDER}>
ip = <ip-range>
Add NTP server = <ip-range>
where:
name The name of the service for this access list. REQUIRED
ip The IP address (range) for this access list.Command: sntp
add
REQUIRED
Add NTP server Syntax : add [addr = <ip-address>] [name = <string>] [version
= <number{1-4}>]
REQUIRED
SYNTAX:
service system ipdelete [addr = <ip-address>]
[name = <string>]
[version = <number{1-4}>]
where:
addr IP address of NTP server to be added to list OPTIONAL
name DNS name of NTP server to be added to list. If both the IP
address and the DNS name are provided, the IP address is
ignored.
OPTIONAL
version SNTP version of server (1,2,3 or 4) OPTIONAL

Technicolor TG582n Specifications

General

Type	ADSL Modem Router
Wi-Fi Standards	802.11b/g/n
Antenna	Internal
Security	WEP, WPA, WPA2
VoIP	No
Ethernet Ports	4
USB Ports	1 USB 2.0 port
ADSL Standards	ADSL2, ADSL2+