Technicolor TG582n - Eth Bridge Filter Attach

ETH COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
313
eth bridge filter attach
Enable a filter.
SYNTAX:
eth bridge filter attach brname = <{bridge}>
name = <{}>
where:
brname The name of an bridge. REQUIRED
name The name of the filter to configure. REQUIRED