Technicolor TG582n - Eth Switch Qos Weights

ETH COMMANDS
DMS-CTC-20101206-0049 v1.0.Copyright 2011Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use,
extraction and communication of its contents, is not permitted without written authorization from Technicolor.
407
eth switch qos weights
Configure the queue weights.
SYNTAX:
eth switch qos weights queue0 = <number{0-100}>
queue1 = <number{0-100}>
queue2 = <number{0-100}>
queue3 = <number{0-100}>
where:
queue0 Weight of queue 0 in WFQ (in %). REQUIRED
queue1 Weight of queue 1 in WFQ (in %). REQUIRED
queue2 Weight of queue 2 in WFQ (in %). REQUIRED
queue3 Weight of queue 3 in WFQ (in %). REQUIRED